Log In | Register
Skip to main content

 

  User Info

  Recent Images

IMG_20190206_204442.jpg
Posted by: Dave

Welcome

Welcome to Make 'n Hack

The Forum is here to be enjoyed by any one. Please feel free to look around

However, registering opens up all the features of the forum to you and allows you to contribute to our growing community


Topic: Prusa release an open source SLA printer (Read 145 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.
Prusa release an open source SLA printer
https://youtu.be/rZXmtCFBtXg

Quote
The SL1 is using a 5.5’’ high-resolution LCD display with the physical resolution of 2560×1440p, resulting in 0.047mm per pixel, that’s the fixed XY resolution. A high-performance UV light will cure one layer at a time, which takes about 6 seconds and then the printing platform is lifted, so the printer can start creating another layer. This configuration gives us a maximum print area size of 120 × 68 × 150 mm (or 4.7 × 2.6 × 5.9 in.).
 
It is also using Trinamic drivers for the Z-axis........

Read about it on Prusa's site HERE


 

  Recent Topics

New  Re: Movement 27 (507 Movements)
[Project threads]
Dave

New  Re: 3D printed Numpad
[Project threads]
Dave

New  3D printed Numpad
[Project threads]
Jebidiah_Crumps

New  Movement 27 (507 Movements)
[Project threads]
Dave